View DR-120-48_1233716.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TOTAL POWER INT'L
120W Single Output Industrial DIN RAIL Power Supply
Features :
Cooling by free air convection
DR-120
series
AC input range selectable by switch Protections:Short circuit/Over load/Over voltage/Over temperature Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved LED indicator for power on 100% full load burn-in test Fixed switching frequency at 55KHz 3 years warranty
R
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT DR-120-12 12V 10A 0 ~ 10A 120W DR-120-24 24V 5A 0 ~ 5A 120W 80mVp-p 24 ~ 28V 1.0%
0.5%
1.0%
DR-120-48 48V 2.5A 0 ~ 2.5A 120W 100mVp-p 48 ~ 53V 1.0%
0.5%
1.0%
RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 12 ~ 14V VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD
PROTECTION OVER VOLTAGE
0.5%
1.0%
500ms, 70ms, 30ms/230VAC 500ms, 70ms, 30ms/115VAC at full load 88 ~ 132VAC/176 ~ 264VAC by switch 248 ~ 370VDC
47 ~ 63Hz 80%
3.3A/115VAC 2A/230VAC
84%
85%
COLD START 30A/115VAC 60A/230VAC <3.5mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 29 ~ 33V 58 ~ 65V 15 ~ 16.5V Protection type : Shut down o/p voltage, re-power on to recover 90 5 (TSW1) 85 5 (TSW1)
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE
EMC
(Note 4)
90
5
(TSW1)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL508,UL60950-1, TUV EN60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55011,EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 HARMONIC CURRENT
EMS IMMUNITY MTBF OTHERS DIMENSION PACKING
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
136.8Khrs min. MIL-HDBK-217F (25 65.5*125.2*100mm (W*H*D) 0.79Kg; 20pcs/16.5Kg/1.1CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
120W Single Output Industrial DIN RAIL Power Supply
Mechanical Specification
DR-120
Case No. 921
series
Unit:mm
100
125.2
+V ADJ.
115VAC 230VAC
TB1 1 2 3
TB2 1 2 3 4 LED
ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15
Terminal Pin. No Assignment (TB1)
Pin No. 1 2 3 Assignment FG AC/N AC/L
6 5.5
35
Terminal Pin. No Assignment (TB2)
Pin No. 1,2 3,4 Assignment DC OUTPUT +V DC OUTPUT -V
Output Derating
Static Characteristics (24V)
Ta=25
100
48V
32 28 24 20 16 12
350 300 250 200 150 100 80
80
60
12V,24V
40
20
OUTPUT VOLTAGE (V)
8
-10
0
10
20
30
45
50
60 (VERTICAL)
80 160
85 170
90 180
95 190
100 200
105 210
110 220
115 230
120 240
125 250
130 260
AMBIENT TEMPERATURE (
)
INPUT VOLTAGE (V) 60Hz
OUTPUT RIPPLE (mVp-p)
LOAD (%)

▲Up To Search▲

Price & Availability of DR-120-48

	To Download DR-120-48 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .